BPWCN - P69801, VANWAX H

  • MSDS: BPWCN
  • Manufacturer: R T VANDERBILT CO INC
  • Product Name: P69801, VANWAX H
  • National Stock Number: 9160-00N034095
Product Identification

Product ID:P69801, VANWAX H
MSDS Date:04/06/1990
FSC:9160
NIIN:00N034095
MSDS Number: BPWCN

Responsible Party
R T VANDERBILT CO INC
30 WINFIELD ST
NORWALK, CT 06855
US

Emergency Phone: 203-853-1400

Info Phone: 203-853-1400

Cage: IN612

Contractor
R. T. VANDERBILT CO INC
5150 NORWALK, CT 06855 US

Telephone: 203-853-1400

Cage: 1N612

Ingredients

PARAFFIN WAX

CAS: 64742-43-4


MICROCRYSTALLINE WAX

CAS: 64742-60-5

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PARAFFIN FUMES MAY CAUSE MINOR
IRRITATION TO MUCOUS MEMBRANES AND EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. CONSULT A
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. BURNS WITH MOLTEN LIQUID
SHOULD BE TREATED WITH ICE WATER. INHAL: REMOVE TO FRESH AIR. KEEP
WARM AND QUI ET. GIVE ARTIFICIAL RESPIRATION IF NOT BREATHING.
CONSULT A PHYSICIAN. INGEST: SEEK MEDICAL ATTENTION IMMEDIATELY.

Fire Fighting

Flash Point Method:COC
Flash Point:>218F,>103C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:SWEEP UP SPILLAGE AND TRANSFER TO A CLOSED
CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID INHALING FUMES. AVOID CONTACT
WITH SKIN AND EYES. USE WITH ADEQUATE VENTILATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF EXPOSURE
LEVEL EXCEEDS SAFE STANDARDS.
Ventilation:IF LOCAL EXHAUST VENTILATION IS USED, A CAPTURE VELOCITY OF
150-200 FPM IS RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Density:0.92
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW FLAKES, NO ODOR TO SLIGHT WAXY ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*X AT COMBUSTION TEMPERATURES.

Disposal

Waste Disposal Methods:NOT CLASSIFIED AS A RCRA HAZARDOUS WASTE.
DISPOSE OF ACCORDING TO APPLICABLE ENVIRONMENTAL REGULATIONS.
DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.